-------------------------------
-Part list for LUPI-NIXIE v1.1-
-------------------------------

Supply voltage with PQ1X501M2ZPH voltage regulator is 9 Volts max!

Completeness of the list is not guaranteed

Qty	Order or part number		Vendor		Description
---------------------------------------------------------------------------------------------
1	523453 - 62			Conrad		ALUBOSS ABPH 600 (casing)
1	600069 - 62			Conrad		Cable 4x0,14
1	641138 - 62			Conrad		DCF77 Receiver (others might work too)

2	68u-25V SMD/105'lowESR		Segor		Low ESR Elko 6,3x6,3 mm
1	STTA 106U			Segor		Switching diode (SMB)
1	100uH/1,2A-SMD			Segor		Inductor
1	4312-SMD 10k			Segor		Trimmer poti 10k SMD
19	MMBTA 42			Segor		NPN Transistor
6	MMBTA 92			Segor		PNP Transistor

1	BSP297				DigiKey		Switching transistor
1	PQ1X501M2ZPH			DigiKey		fixed voltage regulator
12	BZX384-B56			DigiKey		Zener 56V SOD323 (anti ghosting)
1	ECA-2EM4R7			DigiKey		4,7µF electrolytic capacitor 250V

1	1N4004				-		Diode (reverse voltage protection)
1	1nF 0603			-
5	100nF 0603			-
1	22µF 1210 (Y5V or better)	-
1	470nF 0603			-
2	10kOhm 0603			-
1	100kOhm 0603			-		Series resistor for Neons
6	390kOhm 0603			-		Base resistor for PNPs
1	4,1k Ohm 1206			-		Series resistor for Nixies
6	91R 0603			-		LED-Option
1	3,3kOhm 0603			-		LED-Option
6	LED 3mm blue			-		LED-Option
1	BC 817-40 SMD			-		LED-Option
1	DCBU 2,1-LF			-		DC Jack 2,1mm

6	IN-14 Nixie			eBay		Russian nixie tube
2	811-608				RS Components	Cute little neon lamp

Lots	Single pin header (long type)	-		This is used to mount the nixies
							The pin header gives stability and
							puts the tube to the correct height
---------------------------------------------------------------------------------------------

Vendor "-" means that the part is standard. You can most likely get it at any regular vendor.

Segor is a german vendor that has a huge selection of standard and special parts.
But some components need to be ordered from DigiKey, because i wanted to use the smallest
possible components for this clock.